D-70 Developer, 5 Gal.

$247.00
#700003B
Met-L-Chek D-70 Developer, 5 Gal.
OR
Description
The use of a developer is required by most penetrant inspection testing specifications. The developer draws the penetrant from the flaw and creates a uniform surface on which to view the penetrant indication. D-70 is used with fluorescent penetrants as form ""d"" and with visible penetrants as form ""e"". It is applied after the surface penetrant has been removed and the inspection surface dried. D-70 nonaqeous developer consists of absorbent powder suspended in a volatile solvent. The developer particles will settle out upon standing, requiring agitation prior to application. This type of developer is most commonly used in aerosol cans, but may also be bulk sprayed using a paint sprayer. The solvent action of this type of developer helps bring the penetrant to the surface enhancing the detectability of the finest flaws. This type of developer uses flammable solvents and should not be used in confined spaces or near open flames or sparks.

D-70 is approved by Boeing, Edf, GE, Pratt & Whitney, ISO- 3452-2005 and is the qualification standard for AMS-2644E. It is low in Sulfur, Sodium, Chlorine, Fluorine and other Halogens, making it safe for use on Titanium and high Nickel alloys found in aerospace, medical and nuclear components.

D-70 finds wide use in weld inspection in ship building and weld repairs. It is used in heat exchanger inspection in what is called the through leak method where penetrant is applied to one side and the D-70 to the other. After a prescribed penetration time the developer coating is inspected for penetrant indications which highlight a through leak.

Specifications
AMS-2644E, AMS-2647C, ASME B & PV code 07 sec V, ASTM E-165, ASTM E-1417, ISO-3452-2005 PMC-4357-7, RR CSS-232 RCC-M rev 2000, Snecma DMC0010 rev J

Typical Physical Properties
Form: milky liquid
Density: 851 g/L
Flash Point: 11.6¢ªC (54¢ªF)
Fluorescence: none
Dry Coating: smooth white
Removability with water: complete
Corrosion of aluminum: none
Corrosion of carbon steel: none
Corrosion of magnesium: none
Corrosion of stainless steel: none
Corrosion of titanium: none
Chloride content: < 150 ppm (0.015%)
Fluoride content: < 50 ppm (0.005%)
Sodium content: < 350 ppm (0.035%)
Sulfur content: < 200 ppm (0.02%)
Mercury: none
VOC¡¯s: 710 g/L
Ozone layer depleting substances: none
PCB¡¯s: none
Ask A Quick Question About This Product

Have a Question?

Captcha

* Required Fields