Used Penetrant Line

#T1750
Used Penetrant Line
OR

PLEASE NOTE: This is a request for price item. Once you place an order for this item you will be contacted by one of our representatives with current item price.

More Views

Description
#1 Penetrant Auto Spray - Set up for use with ZL - 60D
- 36x36x74 (up to 114" with mist collector and doors open)
- Plumbing from pump into chamber was removed along with nozzles, will need to be replaced
- Powered turntable
- Pneumatic doors on switch
#2 Dwell after PT Application #1
- 36x36x36
- Supported by PT App #2 on left and independent legs on right
- Drain pain with plumbing to main drain
- 10" Backsplash
- Rollers in bad shape, most if not all need entire roller or at lease bearings replaced
#3 Penetrant Auto Spray #2 - Set up for use with ZL - 67
- 36x36x74 (up to 114" with mist collector and doors open)
- Plumbing from pump into chamber and nozzles intact
- Powered turntable
- Pneumatic doors on switch
#4 Dwell after PT Application #2
- 60x36x36
- Supported by stations to right and left
- Drain pain no plumbing to main drain
- 10" Backsplash
- Rollers in bad shape, most if not all need entire roller or at lease bearings replaced
#5 Auto Rinse Station
- 36x36x74 (up to 114” with doors open)
- Powered turntable
- Pneumatic doors on switch
#6 Manual rinse touch up station
- 36x36x80
- Roller Surface (Rollers and/or bearings to be replaced)
- Hand Rinse hose and spray nozzle
- Split Curtains to left of station
#7 90 Deg Rest Station
- Roller surface, rollers good for the most part
- Drain pan with drain to manual rinse station
#8 Dryer Station
- 72x36x74 (up to 114" with doors open)
- Roller surface, rollers in good shape
- Pneumatic doors on switch
- Say heat elements and fans work well
#9 90 Deg Rest Station
- Roller surface, rollers good for the most part
- No Drain pan
#10 Rest Station (Dust collector for Dev station mounted under)
- 36x36x36
- Independent legs on right, supported by dev station on left
- Roller surface, rollers in good shape for the most part
- No drain pan
- Torit Dust collector mounted under, 115V (Customer says filters replaced in last 12 months
#11 – Developer Chamber
- 48"” x 36" x 74" (114"with doors open)
- GB Pressure pot missing, picture of pressure pot included in station above.
- Roller surface, rollers in decent shape
- Pneumatic doors on switch
- V bottom
- Dust collector duct
- Push button Auto Cycle
#12 Rest Station
- 36x36x36
- Supported by stations before and after
- Powder catch pan
- Roller surface, rollers in decent shape
#13 Inspection Booth
- 36x36x84
- Hard Acrylic Surface
- Internal Shelf
- 110V Plugs
- Internal white light on switch
- O
Ask A Quick Question About This Product

Have a Question?

* Required Fields