E-59 Remover 12 X 16oz Cans Slow Evaporating

$120.00
#700058
Met-L-Chek E-59 Remover 12 X 16oz Cans Slow Evaporating
OR
Description
E-59 is a class 2 (non-halogenated), Method C inspection penetrant remover. It is designed for use in the solvent wipe technique for penetrant inspection in general metalworking, welding, nuclear and automotive applications. It is a slow dry rate material and is ideal for penetrant wipe removal. E-59 is not used as a pre-inspection surface cleaner. As a penetrant remover it is sprayed onto wiping media and then the penetrant wiped from the surface. The remover should not be sprayed directly on to the test surface to remove the excess penetrant as the sensitivity will be impaired.

E-59 is listed on the Qualified Products List for AMS-2644E. It meets the requirements of AMS-2647, ASME Boiler and Pressure Vessel Code, ASTM E-165, ASTM E-1417, and ISO- 3452-2005 for penetrant inspection materials. It is low in Sulfur, Chlorine, Fluorine and other Halogens, making it safe for use on Titanium and high Nickel alloys found in aerospace, medical and nuclear components.

E-59 contains flammable solvents and should not be used around open flames or sparks.

Specifications
AMS-2644E AMS-2647C
ASME B & PV code 07 sec V
ASTM E-165 ASTM E-1417
ISO-3452-2005
NAVSEA-T9074-AS-GIB-010/271
RCC-M rev 2000

Typical Physical Properties
Form: clear liquid
Density:780 g/L
Flash Point: > 62.2¢ªC (>144¢ªF)
Viscosity 1.7 mm2/s
Fluorescence: none
Corrosion of aluminum: none
Corrosion of carbon steel: none
Corrosion of magnesium: none
Corrosion of stainless steel: none
Corrosion of titanium: none
Residue: < 0.005 g/100 ml
Chloride content: < 100 ppm (0.01%)
Fluoride content: < 50 ppm (0.005%)
Sulfur content: < 100 ppm (0.01%)
Mercury: none
VOC¡¯s: 780 g/L
Ozone layer depleting substances: none
PCB¡¯s: none
Ask A Quick Question About This Product

Have a Question?

Captcha

* Required Fields