One Complete NDT Source
Ultrasonic Inspection

Accessories

Sonotech Shear Wave & Immersion Transducers



Sonatest Ultrasonic / Ultrasound transducersAngle Beam Ultrasonic Transducers


Orion - Single Angle Shear Wave


Features:

  • High spec shear wave transducers incorporating round crystals to avoid side lobes.
  • High damped with high output & excellent noise to signal ratio.Single Angle Shear Wave Ultrasonic transducers
  • Enables close access to weld cap, allowing greater area of the weld to be inspected.
  • Casing scaled in millimeters.
  • Optimally designed shoe & excellent damping for low internal noise.

Applications:

  • Critical Welds
  • Forgings
  • Components requiring accurate inspection

Product Item No.  
Orion - Single Angle Shear Wave - Call 1-800-962-1788 for More Info

 



Single Angle Shear Wave Ultrasonic transducersSAO - Single Angle Shear Wave Ultrasonic Transducers


Features:

  • Medium damped, lead zirconate titanate (PZT) elements tuned to give optimum gain & resolution for general use.
  • Enables close access to weld cap, allowing greater area of the weld to be inspected.
  • Casing scaled in millimeters.
  • Color coded labels to enable recognition angle.
  • Acrylic wear plates allow shaping for curvature or repair when worn.

Applications:

  • Welds
  • Components requiring inspection by transverse shear wave techniques

Product Item No.  
SAO - Single Angle Shear Wave Ultrasonic Transducer - Call 1-800-962-1788 for More Info

 



Large Single Angle Shear Wave Ultrasonic transducersLSA - Large Single Angle Shear Wave

 

Features:

  • Appropriate for large testing areas or where extra penetration is required.
  • Medium damped transducers, lead zirconate titanate circular elements provide low noise and high output.
  • Housed in stainless steel cases with epoxy tops and finger push.
  • Color coded labels to enable recognition angle.
  • Acrylic wear plates allow shaping for curvature or repair when worn.
  • Sets of 10 plexiglass wear plates 2mm thick, with acoustically matched adhesive is available as a kit.

Applications:

  • Large work pieces
  • Weldments
  • Forgings & Castings
  • Shafts

Product Item No.  
LSA - Large Single Angle Shear Wave - Call 1-800-962-1788 for More Info

 



Twin Angle Shear Wave Ultrasonic transducersCDA - Twin Angle Shear Wave Ultrasonic Transducers

 

Features:

  • Medium damped, lead zirconate titanate elements with a 6 toe in angle for optimum near surface resolution and tuned to provide maximum gain.
  • 2mm Perspex wear plate allowing shape for curved surfaces.
  • Replacement shoes available when worn.

 

Applications:

  • Small flaws directly under surface or in areas inaccessible with compression probes
  • Small components with low attenuation to transverse or shear waves
  • Radial or corrosion cracks in thin walled containers
  • Transverse cracks on heat exchanger tubes

Product Item No.  
CDA - Twin Angle Shear Wave Ultrasonic Tranducer - Call 1-800-962-1788 for More Info

 



Single Angle Shear Wave Ultrasonic transducersSA - Single Angle Shear Wave


Features:

  • Medium damped, lead zirconate titanate elements tuned to give optimum gain & resolution for general use.
  • DGS graticules available for 45, 60 and 70 angle transducers.
  • Low internal noise level enhances near surface resolution.
  • Color coded labels to enable recognition angle.
  • Stainless steel case for durability.
  • 2mm, Perspex wear plate allowing shape for curvatures, easy replacement when worn.

Applications:

  • Welds
  • Components requiring inspection by transverse shear wave technique

Product Item No.  
SA - Single Angle Shear Wave - Call 1-800-962-1788 for More Info

 



Immersion Ultrasonic Transducers


High Damped Slim-Medium Damped Ultrasonic transducersSLIH - High Damped Slim - Medium Damped

 

Features:

  • High damped gives excellent resolution & optimum sensitivity.
  • Medium damped gives an optimum combination of resolution and superior gain.
  • Epoxy face acoustically matched to water.
  • Flat faced or focused for spherical or line focusing

Applications:

  • Used in semi or fully automatic testing for critical components using a water path to detect small flaws, with    reproducibility of text results for the scanning of metal and composite parts for flaw detection, bond testing or on line thickness gauging.
  • C-scan or B-scan imaging of components.

Product Item No.  
SLIH - High Damped Slim - Medium Damped - Call 1-800-962-1788 for More Info

 

 



Sonatest Ultrasonic / Ultrasound transducers

Test Equipment Distributors also carries

Single Contact & Twin Contact Ultrasonic Transducers
Angle Beam & Immersion Ultrasonic Transducers
Sonatest Special Transducers

If there isn't a transducer probe application here for your unique application, we can build one!